Get in touch
U15 | Anwit
U15 | Anwit
Force Sensors

U15

The cost-effective U15 reference force transducer can be used as a transfer standard and as a master sensor. Measuring range: 10 to 100 % of its capacity.

The K-U15 is the cost-effective reference force transducer - ready to be configured in accordance with your needs.

Overview
Downloads

Special Features

  • Tensile/compressive force transducer
  •  Nominal (rated) forces 2.5 kN to 2.5 MN
  • Class 0.5 to ISO 376 in force measurement range
    between 10 % and 100 % of the nominal (rated)
    force (in combination with DKD calibration
    certificate)
  • Electronic bending moment adjustment
  • Double bridge version, TEDS and other options
    available

Extensive range of accesories

  • TEDS
  • Tensile force application per ISO 376
  • Thrust pieces per ISO 376
  • Knuckle eyes
  • Various connection cables in different, practical lengths and with plugs, soldered on for connection to the amplifier, on request.

The U15 is the cost-effective reference force transducer - ready to be configured in accordance with your needs.

Find bellow some explanations to our options.

Plug version bridge A or B?

The standard version of  the U15 is delivered with a bayonet connector (B). A threaded connector can be supplied instead, if required (G).

Transducer identification

You can order your sensor with a “Transducer Electronic Data Sheet”, TEDS (T). In this case, your sensor is equipped with an electronic memory that is programmed with the technical characteristics of the sensor. If the sensor is connected to an instrument with TEDS 0-wire functionality, for example, HBK’s Quantum models or the ClipX modules, the instrument will read out the specific data and the setup process will run automatically.

Number of measuring bridges

The U15 force sensors are available in single bridge (SB) or double bridge (DB) versions. Double bridge sensors feature two independent measurement circuits, so the sensor has two outputs. This can be used to connect two different amplifiers working independently.

Sensitivity adjustment

The U15 have a rated output in the range from 4 mV/V to 4.95 mV/V (steel types, capacities greater than 10 kN) or from 2 mV/V to 3 mV/V (aluminum types, capacities up to and including 10 kN) (U). The sensors can be adjusted to 3 mV/V for the steel types or 2 mV/V for the aluminum types on request (J).