C10

C10 sensors are radially symmetrical force transducers for compressive forces. The output signal is higher than with other  load cells (up to more than 4 mV/V) so that the resolution and the noise /signal ratio of your measurment chain is improved. The C10 series is a benchmark in accuracy, made from rust-free materials, and various configuration options are available for current market prices.

• HBM accuracy class: 0.02… 0.05
• Capacities: 2.5 kN to 1 MN
• Output signal: mV/V (passive Wheatstone bridge) and IO-Link

New: With the new option “VAIO” the C10 comes along with an integrated digital amplifier. Your advantages:

Greater precision: Linearity error 0,005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TCZero: 0.006 % /10K

Improved reliability: The Sensor health monitoring of the C10 sends warnings in case of exceeding temperature or mechanical limits before problems occur

More information: Temperature measurement, statistical information

Lower costs, easy setup: The C10 comes along as adjusted sensor. When connected to an IO-Link master you will get immediately correct readings in Newtons. Low cabling costs.

Standard instrument features: Limit switches, peak detection, digital output, Filter

Fast: Internal sampling rate: 40 kHz, 1 ms cycling time to the IO-Link master

Please have a look at the K-C10 model. Beside many other option you can find order informaton for the IO-Link version as well.

Advantages of all C10:

Improved precision:

• TC0 of only 75 ppm/10K, with digital output just 60 ppm/ 10K
• Minimal non-linearity, small hysteresis and excellent repeatability (0.025%)
• High output signal of greater than 4 mV/V (from 25 kN capacity). Also available: Integrated amplifier

Economical: Wider measurement range means the same accuracy with fewer sensors – and fewer rejects in production. Even improved with IO – LINK option.

Adaptable usage

• Made of rust-free material
• IP68 degree of protection (with cable option)
• Not affected by lateral force and eccentric load application
• Vibration resistant
• EMC approved

Reliable under harsh environmental conditions, even with electromagnetic fields.

Flexible configuration

• Flexible configuration options
• Over 10,000 combinations available at short delivery times
• Different connector and cable options, TEDS, double-bridge versions available, etc.
• Accessories available separately: thrust pieces, connection cables, calibration services
• Available with integrated digital amplifier.

Sensors can be matched to the measurement task; plug and play solutions save time and reduce likelihood of installation errors. With integrated IO-Link option even more economical and precise.