MX430B: QuantumX SG Bridge Amplifier (4) | Anwit

Measurement modules

MX430B: QuantumX SG Bridge Amplifier (4)

Name: MX430B: QuantumX SG Bridge Amplifier (4)
Brand: Anwit
SKU: 3819
Price: 1.00 UAH
Availability: PreOrder

QuantumX family 4-channel measurement module for precise measurements when connecting SG full bridge-based transducers;
Supports the following transducer technologies:
– Strain gage full bridge circuit;
The following applies for each channel:
– Accuracy: 100 ppm;
– Bridge excitation: 2.5 or 5 V with DC or CF-based bridge excitation or DC 10 V;
– Measuring ranges: 2.5 or 5 mV/V;
– Transducer impedance: max. 5000 Ohm;
– Bridge excitation: 600 Hz CF for interference suppression (bandwidth: max. 200 Hz);
– Alternative bridge excitation: Direct voltage (DC) and therefore high dynamics (bandwidth: 6 kHz);
– Supports 6-wire circuit;
– Data rate: max. 40 kS/s;
– Galvanically isolated inputs for current feed and communication;
– TEDS support: automatic sensor identification;
– Scaling: 2-point / gain+offset, table, polynomial, multi-polynomial;
– Digital low-pass filter: Bessel, Butterworth, linear phase;
– Working standard calibration certificate saved in the device;
Special functions:
– Real-time calculation of 4×4 matrix for use with multi-component transducers, etc.;
– Analog output per channel (BNC): 10 V, scalable, filter;
General information:
– Socket: SubHD-15;
– 1 x Ethernet with PTP support;
– 2 x FireWire;
– Voltage supply: DC 10…30 V, max. 8 W;
– Factory calibration data in accordance with DIN/ISO 10012 saved on the device (generate certificate using MX Assistent)
– Adapter for SubD (KAB416) or MS plug (KAB144) available.

QuantumX MX430B: Precision and Maximum Interference Suppression

Overview

Downloads

MX430B is the precise and compact module of the QuantumX family. It provides four inputs for accurate measurement of strain gauge full bridge based sensors such as uni- or multiaxial force sensors, torque transducers as well as pressure sensors. HBM provides the entire measurement chain for efficient measurement: precise sensors, the QuantumX MX430B measurement module and suitable software.

Precise force and torque measurement is essential, in particular when the objective is to determine the exact balance in aerodynamic tests of vehicles, aircraft or sports equipment in the wind tunnel. MX430B is also well suited for other test bench applications demanding high precision and reliability such as the determination of the center of gravity of rockets, measurement analysis of fuselage or load analysis in engine test benches. The module is lightweight and compact and thus allows for portable use for servicing in machine and sensor calibration.

Precision

4 strain gauge full bridge inputs offer a minimum accuracy of 100 ppm
Precision with repetitive and long-term measurements
Withstands interferences such as electromagnetic radiation or temperature thanks to carrier frequency analysis
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Particularly well suited for test bench applicationsdemanding high precision and reliability such as aerodynamic analyses in the wind tunnel

Flexibility

Precise validation of quantities such as force, torque and pressure
For static and dynamic measurements
Distributable, therefore requiring minimal wiring effort
Flexible parameterization, through use of every channel in either AC or DC mode

Enhanced long-term stability through patented background calibration

Easy Integration

Allows for portable use for servicing in machine and sensor calibration
TEDS support enables sensors to be quickly and reliably replaced
Real-time integration thanks to directly scalable voltage outputs (+/- 10 V) with optional filter, EtherCAT (CX27B), CAN (MX471B)
Reliable catman software support

Efficient and dynamic system analysis with full bandwidth

File	Languages
QuantumX MX430B - Data Sheet (B04130)	English
QuantumX - Brochure (S02333)	English

Downloads

QuantumX MX430B - Data Sheet (B04130)